As with all STEEL-IT Brand Coatings, STEEL-IT Polyurethane Aerosol products feature custom-engineered, 316L stainless steel flake and provides superior protection against corrosion, abrasion, salt, alkalis and other chemicals. The coating provides the added benefit of being weldable, UV-resistant, and USDA compliant for incidental food contact. STEEL-IT Polyurethane withstands high-pressure washdowns and detergents without chipping or flaking, a critical feature in so many applications across industries. Superior anticorrosion coating Single component coating that air dries Handy aerosol for easy-to-apply original jobs and touch-up work UV-resistant Weldable! – No need to grind off the coating when repairs or add-ons are required Withstands high-pressure washdowns without chipping or flaking Temperature Rating: 200 °F The identical, high-quality coating as the Polyurethane Topcoat options available in quarts and gallons

The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather, abrasion, and corrosion resistance in off-road racing applications. The easy to apply system yields a hard, non-toxic, metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns. This single component coating does not require complicated mixing. Apply it directly from the can, it is air dried and requires no baking or heating. USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny metallic finish. Application Guide: A 14oz aerosol can of STEEL-IT Polyurethane Aerosol (black and gray) has practical coverage of roughly 15 square feet per aerosol can, when applied at the recommended 16 mils wet film thickness to achieve 3 mils (.003” or 75 microns) dry film thickness (DFT) per coat. We recommend a minimum of 4 heavy coats to achieve proper build up. Apply direct to metal with no primer if you wish to weld through the product in the future. Steel-It paint is weldable and does not need to be removed to make repairs or additions to chassis, roll cages, suspensions, etc.